1050 Sports Cruiser

OVERALL LENGTH

10.75m

TOWING WEIGHT

7000- 9000KG

BEAM

3.1m

TRANSOM & HULL THICKNESS

8mm

FUEL TANK

800L - 1500L

RECOMMENDED OUTBOARD HP & INBOARD HP

440HP D6 Inboard Minimum

2 x 350HP outboard Minimum

Standard Features Build Spec 825SCC

🛥️ Boat

  • Fully welded checker plate decking – pressure tested and easy to clean (Standard)

  • Reverse chined (gull wing) non-pounding hull design – fully framed and plated, commercially proven concept (Standard)

⚙️ Engine

  • 2x Mercury Verado V10 XXL 350HP 30-inch shaft

    • Digital throttle shift

    • VesselView 502 gauge

    • Electric steering

    • Stainless steel propeller (Standard)

📡 Electronics

  • Simrad NSS16 EVO3S 16" MFD flush dash mounted

  • VSSLNK single kit with full NMEA 2000 network (Standard)

  • Simrad XSONIC TM 275LH-W CHIRP transducer, transom mounted (Standard)

  • VHF GME Radio in overhead console with screw-in aerial whip (Standard)

  • Fusion MS RA770 Apollo Stereo with 4x 4” speakers and aerial (Standard)

⚓ Bow

  • Large anchor well with drains (Standard)

  • “T” shape bow bollard (Standard)

  • Bow sprit with rope guide and roller (Standard)

  • Flat foredeck platform (Standard)

  • Full bow railing (Standard)

  • Bow floodlight bar under bow rail (Standard)

  • Tow eye (Standard)

  • Stressfree NG Maxi Freefall 1400w winch with 110m 8mm braid + 15m chain (Standard)

🛌 Cuddy Cabin

  • Dash removable rear cover for wiring access (Standard)

  • Watertight cuddy roof hatch (Standard)

  • LED cuddy lighting (Standard)

  • V-berth in-fill squab (Standard)

  • 2x upper & lower storage shelves (Standard)

  • Under-squab storage (Standard)

  • Electric flush toilet in vee berth with seacock and privacy curtain (Standard)

  • Marine carpet lined walls and ceiling (Standard)

  • Vee berth squabs (Standard)

  • Shark fin quarter windows (Standard)

🚤 Wheelhouse

  • Driver position for sitting or standing (Standard)

  • Compass with nav lighting (Standard)

  • Custom bolstered front seats with storage base (Standard)

  • Rear box seating with reversible backrest and footrest (Standard)

  • Double rear seat with lift-up squab (Standard)

  • Folding table between port seats (Standard)

  • 12V USB sockets x2 (Standard)

  • Full-width dash top with flush-mount electronics capability (Standard)

  • Throttle housing for top mount (Standard)

  • 45L fridge under rear seat (Standard)

  • Grab rails on roof, fishtail ends & overhang (Standard)

  • Polystyrene insulated ceiling under carpet (Standard)

  • LED anchor mast light (Standard)

  • LED nav lights (Standard)

  • Triple LED red/white interior lights (Standard)

  • Dash-mounted radio console with dual handrails (Standard)

  • Rocket launcher (6 rods) (Standard)

  • Sliding side windows (Standard)

  • Under-deck storage with hinged lid (Standard)

  • Marine vinyl dash/console upholstery (Standard)

  • Marine carpet lined wheelhouse (Standard)

  • Dual pantograph windscreen wipers + washer (Standard)

  • One-piece 6mm curved glass front window (Standard)

  • Dual 6-switch wiring panel with fuse access (Standard)

🧼 Cockpit

  • Battery storage with 2x large hatches (Standard)

  • Built-in buoyancy (Standard)

  • Saltwater deck wash system (Standard)

  • Fresh water system: 85L tank, hose, pump, filter, tap (Standard)

  • 400L in-floor fuel tank (Standard)

  • LED deck spotlights (Standard)

  • 6x stainless steel rod holders (Standard)

  • Storage/kill tank with hinged lid & plastic liner (Standard)

  • Paddle & gaff storage (Standard)

  • Large side shelves (Standard)

  • Auto bilge pump with 3-way switch (Standard)

  • In-deck sump with drainage (Standard)

  • Sump scuppers for self-draining (Standard)

🔚 Transom

  • 750mm removable bait station with 4 rod holders, knife and drink holders (Standard)

  • 2-step flat folding boarding ladder (Standard)

  • Full-width bat wing boarding platform (Standard)

  • Mid-transom alloy cleat bollards (Standard)

  • Grab rails on Portofino transom (Standard)

  • Live bait tank with top hatch access (Standard)

  • Modern fast-back transom profile (Standard)

  • 30-inch outboard pod (Standard)

  • Transducer mounting plate (Standard)

  • Trim tab mounting plates (Standard)

  • Twin battery system with house/start isolation, parallel switch (Standard)

  • Walk-through transom with starboard slider (Standard)

🎨 Coatings

  • Painted hood, wheelhouse, hull sides, and transom

  • Acid-washed and Nyalic-coated interior & structural areas (Standard)

  • Decal graphics and striping (Standard)

🚛 Trailer - not road legal

Personal Extras:
The extras that can be added to the Sports Cruiser simple or as lavish as you want. We are flexible to be able to work with clients to accommodate most special requests. Its just a matter of asking to ensure that you get what you want in your boat and not adjusting to a standard production fit out.

NOTE - Paint/Upholstery/Flooring are all upgrades that may be present in photos how ever not included in spec. (Enquire for additional information)

A boat with two Honda outboard motors mounted at the stern, docked near a shoreline with trees and a sunset sky in the background.
A close-up of a Garmin marine radar and navigation system mounted on the bow of a boat, with a harbor filled with small sailboats and a partly cloudy sky in the background.
A large white yacht moored at a marina with several other boats in the background, under a cloudy sky.
View from the front of a white yacht docked at a marina, with a covered cockpit and a Garmin radar, overlooking sailboats on calm water under a partly cloudy sky at sunset.
Open mini refrigerator on boat with black leather seat above, located on a wooden deck with a marina and cloudy sky in the background.
Open cooler built into a boat's seating area, with black leather cushions and striped pillow, overlooking a marina through a large window.
Interior of a boat with three black leather seats and a wooden floor, viewed from the front of the boat.
View of a boat interior with a black leather sofa with multiple striped and solid pillows, a wood-trimmed table with folded cloths, two captain chairs at the helm, and large side windows with a view outside.
Compact bathroom featuring a small toilet, a wall-mounted sink with a faucet, a handheld showerhead, and a mirror, all inside a minimalistic, white space with lighting overhead.
Small kitchenette with a microwave above a wooden countertop, a black stove, a stainless steel sink with glass cups inside, and a mini refrigerator below. There are also a yellow sponge and some shelves with containers.
A Honda 250cc boat motor installed on a boat with wooden flooring.
Close-up view of a boat's deck with wood and metal surfaces, showing a seat with a round metal cover, part of metal railings, and a small cabinet with a lock. In the background, there is a wooden dock and water.

Additional Information

Fitting of Engine to include:
Nav Lights, Bilge Pump, Master Switch, Fuel Filter, Fuel Lines, Installation of Gauges & Controls, Pre-delivery check & Sea Trials

Fitting of Stern Drives to include:
Engine Beds, engine well, hinged seal and commercially rated lockable engine box, insulated transom plate, battery shelf, sound proofing, engine air venting engine and leg secured down

Engine Power Options:
Inboard or Outboards

Coatings Options:
Customised graphics package, Nyalic clear coats, Solid and Metallic colours

Electronics options:
Furuno, Garmin, Simrad, Raymarine

Trailer option:
Custom White Pointer aluminium trailer

THE ORIGINAL, LEGENDARY NON-POUNDING HULL DESIGN

NAVIGATION

White Pointer Boats

189 Stanley Road
Gisborne 4010
New Zealand

Phone: 06 868 6519
Email: tony@whitepointerboats.co.nz